Entrance door dedicated to energy-saving constructions. The 73 mm thick wing is filled with polyurethane foam. The warm door frame, in combination with the Roto aluminum threshold, thermal divider and four-sided rebate, ensures energy efficiency at the highest level. It is possible to order the XPS understructure to the threshold allowing for additional thermal insulation increase. Exterior doors are equipped with three 3D hinges with a diameter of 20 mm, which are characterized by the ability to carry heavy loads, which significantly increases the functionality and comfort of use. The entrance structure equipped with such a hinge does not tend to fall. In addition, the hinges allow adjustment in three planes, which ensures symmetry of the wing position relative to the frame (up / down and left / right adjustment), as well as the appropriate pressure of the wing against the frame (third adjustment plane). Two independent locks with three bolts and three anti-theft bolts ensure a high degree of burglary resistance.

An entrance door model dedicated to energy-saving construction. The 73 mm thick door leaf was filled with polystyrene. The warm door frame, combined with the Roto aluminum threshold, thermal break and four-sided rebate, ensures the highest level of energy efficiency. It is possible to order an XPS foundation up to the threshold allowing for an additional increase in thermal insulation. External doors are equipped with three 3D hinges with a diameter of 20 mm, which are characterized by the ability to carry heavy loads, which significantly increases functionality and comfort of use. An entrance structure equipped with such a hinge does not tend to fall. Additionally, the hinges enable adjustment in three planes, which ensures symmetry of the position of the leaf in relation to the frame (up/down and left/right adjustment), as well as appropriate pressure of the leaf against the frame (third plane of adjustment). Two independent locks with three pins and three anti-burglary pins ensure a high degree of resistance to burglary.

This is a warmer version of the Superior model. The entrance door is filled with injected PUR polyurethane foam, providing much higher thermal insulation parameters than expanded polystyrene. The door leaf structure is based on a frame made of high-quality, waterproof hardwood plywood - it ensures mechanical stability of the door leaf in changing weather conditions. The outer leaf is equipped with two locks with three pins and three anti-burglary pins. The energy-saving door frame prevents the formation of thermal bridges thanks to a special, two-part structure divided by a plastic insert - it is equipped with a thermal threshold of the same construction. Outdoor models are equipped with three 3D hinges with a diameter of 15 mm, making adjustment much easier. As in the case of the Superior package, you can order entrance models of a specific height - the factory-made shortcut allows the production of doors to size, without cutting the leaf and frame.

These are 55 mm thick external doors filled with expanded polystyrene boards, which are characterized by very good insulating and acoustic properties. The leaf covering is made of anti-corrosion protected steel sheet, covered with high-quality foil resistant to UV radiation and weather conditions. Entrance structures meet EU energy standards for external doors and perfectly meet the requirements of our climate zone. As standard, they are equipped with two independent locks with three pins, three anti-burglary pins and three three-part hinges. The security standard and the thickness of the sheet metal used to produce the door leaf and frame ensure high resistance to burglary.

These are safe RC 2 and quiet 37 dB external doors with a thickness of 55 mm. The filling ensures high acoustic insulation parameters. The door leaf structure is based on a frame made of high-quality, waterproof hardwood plywood - it ensures mechanical stability of the door leaf in changing weather conditions. The leaf covering is made of anti-corrosion protected steel sheet, covered with high-quality foil resistant to UV radiation and weather conditions. As standard, the doors are equipped with a ROTO letter lock with an independent upper lock and three reinforced anti-burglary bolts. The structure is equipped with three three-part hinges. The standard of security as well as the thickness of the sheet metal and the quality of filling used to produce the door leaf and frame ensure high acoustics and burglary resistance.

Technical door with a thickness of 45 mm filled with foamed polystyrene board, which is characterized by very good insulation and acoustic properties. The leaf sheathing was manufactured from steel sheet protected against corrosion, coated with varnish. As standard, they are equipped with a sash, threshold, installed asymmetrical frame, plastic handle and insert.